RC Electronics - Weather Instruments

DAVIS PRECISION WEATHER INSTRUMENTS (Click on photos for larger view.)
	Wireless Weather Monitor II® with AC Power - Pre-assembled sensor array includes anemometer, rain collector, radiation shield with temperature/humidity sensor, weather-resistant shelter, and galvanized steel mounting pole. Transmitter uses 900 MHz low-power radio waves -- no FCC license required. Typical range is from 100’ to 400’ (30 m to 120 m) depending upon the structural features of the building. Includes Weather Monitor II console, AC-power adapters for transmitter and receiver/console, and one 3-volt lithium battery for transmitter. Use lithium battery when AC-power source is not available. One battery lasts up to six months. Add a second battery (not included) for twelve months. Add additional console/receivers to view weather conditions in more than one location. Because regulations vary, Wireless Weather Stations may not be available outside the USA.
	Complete Weather Monitor II® - Everything you need for measuring inside and outside temperature, wind speed and direction, wind chill, and daily and accumulated rainfall plus barometric pressure, inside and outside humidity, and dew point. Includes Weather Monitor II console along with our self-emptying tipping bucket rain collector, anemometer, and Temperature/Humidity Sensor. Anemometer comes with 40' (12 m) cable. External temperature/humidity sensor and rain collector also come with 40' (12 m) cables. Cables connect to the console through a junction box with 8' (2.4 m) cable. Console includes AC-power adapter with battery backup (battery not included).
	Comprehensive Energy EnviroMonitor®, Standard - The Comprehensive Energy EnviroMonitor comes with all the sensors you need to measure heating and cooling degree days, solar radation and solar energy. Monitor wind speed, wind direction, and wind run as well as wind chill and wind chill degree-days. This system even tracks temperature-humidity index! Includes Energy EnviroMonitor console with barometer, anemometer, temperature/humidity sensor and solar radiation sensor, and AC-power adapter.
	Energy EnviroMonitor® Standard - The Energy EnviroMonitor console tracks barometric pressure and inside temperature. Basic model includes console with LCD and reversible base, AC-power adapter with battery backup (battery not inlcuded), and sensor interface module with 16' (5 m) ground wire and 8' (2.4 m) of standard cable. Add optional sensors to customize your station. With added sensors, you can track solar energy, degree days, temperature humidity indices, and wind run.
	EZ-Mount Weather Monitor II® - Installation is a snap with our new EZ-Mount Weather Stations. Pre-assembled sensor array with galvanized steel mounting pole makes setup quick and easy. Includes Weather Monitor II console and junction box, anemometer, rain collector, temperature/humidity sensor, radiation shield, weather-resistant shelter, and AC-power adapter. Radiation shield protects the temperature sensor from solar radiation and other sources of radiated and reflected heat. Weather-resistant shelter protects the junction box from the elements. Locate the console inside the shelter, next to the junction box, or use the included 100’ (30 m) cable to locate it indoors.
	Wireless Temperature/Humidity Station with Fan-Aspirated Radiation Shield, Includes temperature/humidity sensor, transmitter, and solar-powered fan-aspirated radiation shield. Shield combines fan aspiration and passive shielding to minimize the effects of radiation. Data from up to eight stations may be viewed on a single Vantage Pro Console/Receiver (sold separately). Or, for a complete set of weather data, use with a Wireless Vantage Pro or Vantage Pro Plus. (You can add up to seven Wireless Temperature/Humidity Stations to either of these.) Data may also be viewed on Weather Echo or Weather Echo Plus. Station is battery powered. Lithium battery lasts up to one year under normal conditions.
	Health EnviroMonitor® Standard - The Health EnviroMonitor console tracks barometric pressure and inside temperature and humidity. Basic model includes console with LCD and reversible base, AC-power adapter with battery backup (battery not included), and sensor interface module with 16' (5 m) ground wire and 8' (2.4 m) of standard cable. Add optional sensors for a customized system to suit your needs.
	Comprehensive Health EnviroMonitor®, Standard - This comprehensive systems comes with all the sensors you need to monitor conditions that lead to health hazards such as sunburn, heat stress, or hypothermia. It measures the temperature/humidity index, the intensity of ultraviolet radiation, and apparent temperature. System includes Health EnviroMonitor console, anemometer, temperature/humidity sensor, solar radiation sensor, UV sensor, and AC-power adapter.
	Wireless Temperature/Humidity Station with Standard Radiation Shield - Includes temperature/humidity sensor, transmitter, and radiation shield. Shield protects against solar radiation and other sources of radiated and reflected heat. Data from up to eight stations may be viewed on a single Vantage Pro Console/Receiver (sold separately). Or, for a complete set of weather data, use with a Wireless Vantage Pro or Vantage Pro Plus. (You can add up to seven Wireless Temperature/Humidity Stations to either of these.) Data may also be viewed on Weather Echo or Weather Echo Plus. Station is battery powered. Lithium battery lasts up to one year under normal conditions.
	Wireless Leaf Wetness/Temperature Station - Includes leaf wetness sensor with 40' (12 m) cable and temperature sensor with 40' (12 m) cable. Use the temperature sensor to measure air, soil, or water. Add additional sensors of your choice—up to three more leaf wetness sensors and three more temperature sensors. View the data on a Vantage Pro Console/Receiver (sold separately). Or, for a complete set of weather data, add to a Wireless Vantage Pro or Vantage Pro Plus. Station is solar powered. Transmitter and battery are located inside weather-resistant shelter with solar panel.
	Weather Monitor II® - The Weather Monitor II is a powerful computer weather station with all our most-requested features. Monitor wind speed, direction and wind chill. Track the barometric trend along with inside humidity and inside and outside temperature. Station includes anemometer with 40' (12 m) cable and external temperature sensor with 25' (7.5 m) cable. Cables are connected to the console through a junction box with 8' (2.4 m) of cable. Console includes AC-power adapter with battery backup (battery not included). Backlit display for easy viewing.
	Wireless Soil Moisture/Temperature Station - Includes Watermark® soil moisture sensor with 15' (4.6 m) direct-burial cable and stainless steel temperature probe with 15' (4.6 m) cable. Use the temperature probe to measure air, soil, or water. Add additional sensors of your choice—up to three more soil moisture sensors and three more temperature probes. View the data on a Vantage Pro Console/Receiver (sold separately). Or, for a complete set of weather data, add to a Wireless Vantage Pro or Vantage Pro Plus. Station is solar powered. Transmitter and battery are located inside weather-resistant shelter with solar panel.
	Wireless Weather Monitor II® with Solar Power - Pre-assembled sensor array includes anemometer, rain collector, radiation shield with temperature/humidity sensor, weather-resistant shelter, and galvanized steel mounting pole. Transmitter uses 900 MHz low-power radio waves -- no FCC license required. Typical range is from 100’ to 400’ (30 m to 120 m) depending upon the structural features of the building. Includes Weather Monitor II console with barometer, plus SensorLink transmitter and receiver, pre-installed solar panel, regulator circuit, and rechargeable battery. Also includes AC power adapters and one 3-volt lithium battery. Add additional console/receivers to view weather conditions in more than one location. Because regulations vary, Wireless Weather Stations may not be available outside the USA.
	Data from up to eight stations may be viewed on a single Vantage Pro Console/Receiver (sold separately). Or, for a complete set of weather data, use with a Wireless Vantage Pro or Vantage Pro Plus. (You can add up to seven Wireless Temperature Stations to either of these.) Data may also be viewed on Weather Echo or Weather Echo Plus. Station is battery powered. Transmitter and battery are enclosed in weather-resistant shelter. Lithium battery lasts up to one year under normal conditions.
	Vantage Pro™ - The latest in weather technology! Our Vantage Pro weather stations offer forecasting, on-screen graphing, and much more. Quick view icons show the forecast at a glance—sunny, partly sunny, cloudy, rain or snow—while a moving ticker-tape display gives more details. Our innovative integrated sensor suite combines our rain collector, temperature and humidity sensors, and anemometer into one package—making setup easier than ever and improving performance and reliability. For improved accuracy, temperature and humidity sensors are housed inside a radiation shield. The shield protects against solar radiation and other sources of radiated and reflected heat. Choose our standard radiation shield, or, for the utmost in accuracy, our fan-aspirated radiation shield. Available in both wireless and cabled versions.
	The latest in weather technology! Our Vantage Pro Plus weather stations offer everything found on our Vantage Pro weather stations, plus solar radiation and UV sensors. You'll get forecasting, on-screen graphing, and much more. Quick view icons show the forecast at a glance—sunny, partly sunny, cloudy, rain or snow—while a moving ticker-tape display gives more details. Our innovative integrated sensor suite combines all the outdoor sensors into one package—making setup easier than ever and improving performance and reliability. Rain collector, anemometer, and temperature, humidity, solar radiation, and UV sensors are all included. For improved accuracy, temperature and humidity sensors are housed inside a radiation shield. The shield protects against solar radiation and other sources of radiated and reflected heat. Choose our standard radiation shield, or, for the utmost in accuracy, our fan-aspirated radiation shield. Available in both wireless and cabled versions.
	Weather Wizard III® - The Weather Wizard III displays indoor and outdoor weather conditions at the touch of a button. Large display includes compass rose which shows continuously updated wind direction and wind speed information. Station includes anemometer with 40' (12 m) cable and external temperature sensor with 25' (7.5 m) cable. Cables are connected to the console through a junction box with 8' (2.4 m) of cable. Console includes AC-power adapter with battery backup (battery not included).
	Complete Weather Wizard III® - Everything you need for measuring inside and outside temperature, wind speed and direction, wind chill, and daily and accumulated rainfall. Includes Weather Wizard III console, anemometer, rain collector, temperature sensor.